|
Our supplies stores stock a wide variety of quality tools, equipment and lumber; anything for the concrete and masonry contractor. To contact any of our supplies stores, select the ‘Locations’ menu option above for maps and contact info. |
SELECT A CATEGORY BELOW:
Blades & Bits
|
Colors/Patterns
|
Cleaners
|
Generators
|
Compressors
|
Concrete Tools
|
Masonry Tools
|
BLADES & BITS (Close ^)
Standard Tip Drill Bits
Fits all rotary hammers. Patented flute geometry removes dust from the hole quicker for fast drilling and long life. Shot–peened, double–tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. All tips made to ANSI specifications. Chrome vanadium shaft through–hardened to 50–53 HrC.
|
Multicutter Drill Bits
Fits all rotary hammers. Reduced area above the flute prevents the drill bit from binding while drilling—the full usable length can be utilized. Shot–peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. All tips made to ANSI specifications. Chrome vanadium shaft through–hardened to 50–53 HrC.
|
Bush Tool
For roughing up concrete and asphalt prior to a surface treatment. Fully heat–treated for strength and long life. Forged from superior–grade steel, the working points of these chisels can be resharpened for longevity.
|
Flat Chisel
For general chiseling and breaking work in brickwork, concrete and loose stone (for example: when laying cables). Fully heat–treated for strength and long life. Forged from superior–grade steel, the working points of our chisels can be resharpened for longevity.
|
Scaling Chisel
For removing large quantities of material. Fully heat–treated for strength and long life. Forged from superior–grade steel, the working points of this chisel can be resharpened for longevity.
|
Spade Bit
Blue–Groove point and cutting edge for faster chip removal—four times faster than standard spade bits. Double cutting spurs scribe the outside of the hole reducing breakout. 10% larger shank for added durability. Grooved hex shank prevents slipping in drill chuck or bit extension. Fits all standard quick change chucks.
|
Diamond Tipped Concrete Saw Blade
These blades are perfect for high horsepower as well as low RPM walk behind saws. Ideal for cutting cured concrete, hard aggregates, and similar materials.
|
Circular Saw Blade
Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts. Available in a variety of sizes.
|
Wood Cutting Reciprocating Saw Blade
Fast cutting for wood, composition material and plastic. Use with materials 3/16” and thicker. Bi–metal construction for faster cutting and added durability. Precision set teeth for faster, smoother cuts. 8% Cobalt keeps teeth sharp longer.
|
Demolition Reciprocating Saw Blade
For heavy duty and demolition applications in wood and metal. Use with materials 3/16” and thicker. Electronic beam weld for stronger, longer lasting teeth. Bi–metal construction for faster cutting and added durability. Precision set teeth for faster, smoother cuts. 8% Cobalt keeps teeth sharp longer.
|
Nail Embedded Wood Cutting Reciprocating Saw Blade
Roughing-in work and nail–embedded wood. Use with materials 3/16” and thicker. Bi–metal construction for faster cutting and added durability. Precision set teeth for faster, smoother cuts. 8% Cobalt keeps teeth sharp longer. Available in 6”, 9” and 12”.
|
Metal & Wood Cutting Reciprocating Saw Blade
Cuts composition materials, plastic, pipe, carbon steel and stainless steel. Use with materials 1/8” and thicker. Electronic beam weld for stronger, longer lasting teeth. Bi–metal construction for faster cutting and added durability. Precision set teeth for faster, smoother cuts. 8% Cobalt keeps teeth sharp longer. Available in 6”, 8” and 12”.
|
Close ^
Colors, Patterns and Textures (Close ^)
Concrete Acid Stains
To download a Deco–Etch brochure, CLICK HERE. For closest color representation, visit one of our Supplies Stores and request a color card.
|
Amber
|
Marigold
|
Burnished Copper
|
Mahogany
|
Moss Green
|
Heritage Green
|
Aquamarine
|
Powder Blue
|
Nickel
|
Onyx
|
Faux Brick Stenciling
To download Artcrete’s Faux Brick stencil patterns CLICK HERE.
|
Diamond Tile
|
Fish Scale
|
Jumbo Brick
|
Cobble Circle
|
Flagstone
|
Old English
|
Cobblestone
|
Concrete Texturing
Artcrete® has developed a line of texture tools that use interchangeable texture sleeves, offering additional textures for minimal additional cost.
|
Forest Floor
|
Granite
|
Kitsatchie Rock
|
River Bottom
|
Ocean Floor
|
Quartz Rock
|
Deep Quarry
|
Rock Salt
|
Shatterstone
|
Slate
|
Stone
|
Stratified Rock
|
Stucco
|
|
|
Close ^
Cleaners (Close ^)
Sure Klean® 101 Lime Solvent
A concentrated acidic cleaner for dark–colored brick and tile surfaces which are not subject to metallic oxidation. Safer than muriatic acid. Can be used on colored mortar joints. Safely removes excess mortar and construction dirt with simple cold water rinse.
Not generally effective in removal of atmospheric stains and black carbon found on older masonry surfaces; try Sure Klean® Restoration Cleaner.
|
Sure Klean® 600 Detergent
A general purpose, concentrated acidic cleaner for brick, tile and concrete surfaces. Dissolves mortar smears and construction dirt quickly leaving the masonry clean and uniform with no acid burning or streaking. Safer than muriatic acid for new masonry surfaces. Fast and easy to apply—use with cold water rinse.
May not be suitable for cleaning buff–colored brick and brick or tile with manganese or other metalic additives. Not suitable for cleaning polished or certain glazed surfaces. Exceeding two applications may leave a detergent residue. Not effective for removing atmospheric dirt or black carbon stains.
|
Sure Klean® Light Duty Restoration
Safely removes light to moderate atmospheric and oxidation staining from dense masonry surfaces. Removes difficult calcium (concrete) stains, white scum and other staining from most window glass. Highly efficient cleaner with reduced potential for damage to adjacent or surrounding surfaces.
Not suitable for polished marble or polished travertine. May damage some nonmasonry surfaces. May have limited effect on highly porous surfaces. Not intended for regular maintenance cleaning of glass.
|
Sure Klean® Heavy Duty Concrete Cleaner
Formulated for removal of concrete splashes, excess mortar, retarders, heavy eflorescence, embedded stains, rust and suface soiling from textured concrete surfaces. Improves the color and uniformity of most standard concrete, colored concrete, precast panel and concrete block surfaces. When used in strong solutions, will etch concrete; can be used for additional aggregate exposure ideal for ”weathering” architectural concrete. Improves bond of protective coatings/membranes.
Not for use on polished surfaces.
|
Sure Klean® Vana Trol
A concentrated acidic cleaner for new masonry surfaces that are subject to vanadium, manganese and other metallic stains. Designed to simplify rinsing and reduces potential for efflorescence. Clings to masonry surface and softens excess mortar and job dirt. Slow–drying so it rinses clean without streaking. Safe for use on must unpolished natural stone or cast stone surfaces.
|
Sure Klean® Defacer Eraser Graffiti Wipe
An easy–to–use graffiti remover that does not contain methanol, methylene, methylene chloride or other ”halogenated” solvents prohibited on many projects. Graffiti Wipe removes a variety of graffiti stains from the most smooth masonry, wood and metal surfaces. Low odor, rinses easly with cold or hot water. Product efficiency is reduced during cold weather. May damage synthetic or reflective glass.
|
Close ^
Generators (Close ^)
Mitsubishi 4000z Generator
Maximum output: 4000 watts.
8.5 continuous operating hours.
Electric ignition.
5.5 gallons fuel capacity.
Dry weight: 157 lbs.
|
Mitsubishi 4800z Generator
Maximum output: 4800 watts.
8 continuous operating hours.
Electric ignition.
5.5 gallons fuel capacity.
Dry weight: 165 lbs.
|
Mitsubishi 5800z Generator
Maximum output: 5800 watts.
7.3 continuous operating hours.
Electric ignition.
5.5 gallons fuel capacity.
Dry weight: 179 lbs.
|
Mitsubishi 6700z Generator
Maximum output: 6700 watts.
6.5 continuous operating hours.
Electric ignition.
5.5 gallons fuel capacity.
Dry weight: 183 lbs.
|
Close ^
Compressors (Close ^)
2 HP Air Compressor
Low amp draw
Roll-bar handle
Durable cast iron cylinder
Large automotive style filter
|
 |
|
|
Close ^
Forming Supplies
|
Curing & Sealing
|
Lasers & Meters
|
Hammers
|
Measuring
|
Marking
|
Mixers
|
Curing & Sealing (Close ^)
Kure–N–Seal
A transparent, sprayable, acrylic–based polymer solution that cures, seals and dustproofs freshly placed or aged concrete in a single operation. Complies with ASTM C 309.
|
Sonosil
A clear water–soluble, sodium–silicate–based hardening and dustproofing compound. East to apply, leaves no residue, dries quickly, and is available with fugitive red dye for even application.
|
Blok–Guard & Graffiti Control
A clear, solvent–based silicone elastomer formulated to weatherproof concrete block and other porous masonry materials. Protects masonry surfaces from repeated graffiti attacks without altering the natural appearance. Penetrates and fills pores to prevent water penetration through exterior walls exposed to normal weathering. Graffiti removal is fast and easty using Defacer Eraser. Apply with low–pressure spray, brush or roller.
Not suitable for extremely dense or polished surfaces. Will not prevent water penetration through structural cracks, defects or open joints.
|
NP 1
A one–component,
high–performance,
gun–grade, moisture–curing polyurethane sealant designed for a wide range of sealing and caulking applications in active exterior joints. Requires no mixing and typically bonds to many materials without a primer, including concrete and masonry. Recommended for active, vertical interior, exterior joints, including expansion wall joints, curtain walls, panel walls, precast walls, window frames, structural components, dams, spillways and stormwater drains. Substrates include concrete, masonry, aluminium and wood.
|
SL 1
A one–component, nonpriming, self–leveling elastomeric polyurethane designed for expansion joints in concrete floors and decks. Use it where flexibility as well as abrasion and puncture resistance are required.
|
FlameSafe FS 4000 Silcone Sealant
A flexible product used to prevent/reduce the spread of fire, smoke, gases and water. Designed for firestopping applications for penetrations, construction joints and perimeter (curtain wall) joints. Offered in two forms: a non–sag caulk which can be troweled, and a self–leveling grade that can be poured into place in floor applications.
|
PVC (Polyvinylchloride) Waterstops
Typical applications include: water and waste water treatment facilities; dams, locks, canals, water reservoirs and aqueducts; tunnels and culverts; foundations; primary and secondary containment structures.
|
Hydrotite Waterstop
Typical structures utilizing hydrotite include: water and waste water treatment facilities; primary and secondary containment structures; tunnels and culverts; dams, locks, canals, water reservoirs and aqueducts; pipe penetrations; swimming pools; storage tanks; retaining walls; foundations; slabs on grade.
|
Hydraulic Water–Stop Cement
Rapid setting, high strength repair material designed to plug leaks instantly in concrete and masonry. Sets in 3–5 minutes and can be used above and below grade. Designed to block running water or leaks in cracked masonry or concrete surfaces. Used for swimming pools, foundations, and sealing around concrete pipe. |
Foam Backer Rod
Recommended if the joint or crack to be sealed is wider than 1/4”. Easily installed in joints by simply pressing the material into the recess. Saves money: most of a large joint can be filled with backer rod before applying a more costly caulking substance. |
|
|
Close ^
Lasers and Meters (Close ^)
UL633 Universal Laser
The universal laser can provide precise automatic axes alignments to two desired points without positioning the receivers 90° perpendicular. This allows contractors to perform easily dual axis alignments for applications such as grade work on sports fields, parking lots, tennis courts and driveways.
Featured highlights:
- Automatic electronic
self–leveling provides fast, easy horizontal level, grade, and vertical plumb setup.
- Large compensated grade range from -25% to +25%.
- No rework due to automatic temperature and grade– and cross axis compensation.
|
LL400 Laser Level
The fully automatic,
self–leveling Spectra Precision® Laser Level LL400 Laser Level sets a new standard in rugged reliability, handling a wide variety of general and concrete construction applications. Even in tough jobsite conditions, the LL400 consistently delivers reliable, accurate performance to increase your overall productivity and cost-savings.
Featured highlights:
- Fast setup, minimal training time and automatic self–leveling minimize operating costs and boost productivity.
- Highly rugged design and unique patent–pending lighthouse seal protects the transmitter head and glass, offering superior drop and weather protection for reduced downtime.
- One–person operation reduces labor costs.
|
LL500 Laser Level
The Spectra Precision® Laser level LL500 Laser Level is a one–person leveling system designed for longer range measurements across your entire site. Accurate, stable and reliable, the LL500 features a 1,600 ft (500 m) working diameter which increases productivity by reducing the need for multiple setups on a large job site.
Featured highlights:
- High accuracy with temperature compensation provides highly stable, repeatable accuracy even under large temperature changes.
- Alkaline or rechargeable batteries keep the unit working and minimize downtime due to power loss.
- Self–leveling with built–in shut off for increased accuracy over the entire work area and reduced errors.
|
LL100N Laser Level
The Spectra Precision® LL100N Laser Level is a complete one man leveling crew in a case. A complete system is contained in a single hard–shelled, portable carrying case—the laser, receiver, clamp, tripod, and grade rod—for easy transportation, storage, and use. A standard case with laser and receiver only is also available.
Featured highlights:
- Automatic self–leveling increases productivity with fast setups and minimal training.
- One person elevation control up to 575 ft
(175 m) away increases productivity.
- Durable construction can withstand tough jobsite conditions.
|
LL300N Laser Level
The Spectra Precision® LL300N Laser Level features a rugged design with ”hard hat” rotor protection that provides superior drop and weather protection. Built to withstand severe drops of up to 3 ft (1 m) directly onto concrete, or up to 5 ft (1.5 m) when pushed over on a tripod means less downtime and cost due to damage caused by accidental drop.
Featured highlights:
- Increases productivity with fast setups, fewer mechanical parts, and automatic self–leveling.
- Maintains performance even in rainy, dusty and other harsh job site and weather conditions.
- Durable design reduces downtime due to drops and tripod tipovers.
|
DG511 Underground Laser
The rugged Spectra Precision® DG511 Pipe Laser is built tough for long lasting performance and reliability. The DG511 pipe laser is completely waterproof and designed to ensure easy cleanup. Setup is fast with a full range of mounting accessories available, and easy to use with straightforward,
”no–instructions–required” controls.
Featured highlights:
- Installation of gravity flow sanitary and storm sewer pipelines.
- Pipe jacking.
- Tunnel boring.
|
DG711 Underground Laser
The rugged Spectra Precision® DG711 Pipe Laser is built tough for long lasting performance and reliability. The DG511 pipe laser is completely waterproof and designed to ensure easy cleanup. Setup is fast with a full range of mounting accessories available, and easy to use with straightforward,
”no–instructions–required” controls.
Featured highlights:
- Installation of gravity flow sanitary and storm sewer pipelines.
- Pipe jacking.
- Tunnel boring.
|
HV101 Interior Laser
The automatic,
self–leveling Spectra Precision® HV101 Interior Laser is a professional tool with an economical price tag. The HV101 laser is capable of handling a wide variety of horizontal, vertical and plumb applications. It is rugged enough for the toughest jobsite and designed to survive a 3 foot (1 m) drop onto concrete.
Featured highlights:
- Automatic self–leveling increases productivity with fast setups and minimal training.
- Beam is easily visible even in brightly lit conditions.
- Durable construction can withstand tough jobsite conditions.
|
HV301 Interior Laser
The automatic,
self–leveling Spectra Precision™ HV301 Interior Laser is an economical laser with exceptional versatility and visibility. Whether your job site is indoors or outdoors, the HV301 Interior Laser is capable of handling a wide variety of horizontal, vertical and plumb applications. Its high–visibility beam enables 90° simultaneous rotating and plumb/perpendicular references.
Featured highlights:
- Composite material housing is rugged and lightweight, and is capable of withstanding a drop of up to 1 meter
(3 feet).
- Fully automatic
self–leveling in both horizontal and vertical for easier setups.
- Highly visible beam and scanning functions for improved jobsite visibility.
|
HV301G Interior Laser
The Spectra Precision® HV301G Interior Laser green laser beam is easy to see in interior jobsite conditions. The superior visibility of the green beam is useful for extended working ranges or in bright conditions. The beam stays visible for efficient work in these less than ideal conditions.
Featured highlights:
- High visibility green beam is four times more visible than standard red beam lasers allowing work at longer distances and in brighter conditions.
- Automatic self–leveling in horizontal and vertical applications increases productivity with fast setups and minimal training.
- Durable construction can withstand tough jobsite conditions.
|
GL612 Grade Laser
The GL612 Grade Laser is a single grade laser and the GL622 is a dual grade laser. Both are rugged, automatic self–leveling lasers featuring grade capability of ± 25% and can be used in a wide variety of grading, excavating and alignment applications by general and specialty contractors.
Featured highlights:
- Automatic electronic
self–leveling provides fast, easy horizontal level, grade, and vertical plumb setup.
- Large compensated grade range from
-25% to +25%.
- Quick setups with the radio remote control for horizontal, vertical and grade applications.
|
GL622 Grade Laser
The GL612 Grade Laser and GL622 Grade Laser include the RC602
full-function radio remote control which offers advanced automatic features like Grade Match, PlaneLok and Automatic Axis Alignment. The remote as well as the transmitters have an intuitive graphic display which is back–lit for ease of viewing.
Featured highlights:
- Automatic PlaneLok
(Y– or X–axis) automatically locks on to an existing elevation or vertical alignment point which eliminates all drift or possibility of error due to improper calibration or weather (X– only GL622).
- Very rugged, survives a
1 m (3 ft) drop on concrete—reduces service and repair costs.
- Mask mode eliminates interference with other crews on the jobsite.
|
GL412 Grade Laser
The Spectra Precision® GL412 Grade Laser and GL422 Grade Laser are
cost–effective, automatic self–leveling lasers that do three jobs—level, grade and vertical alignment with plumb. Both lasers feature a 2–way, full–function remote control so you can make grade changes from anywhere on the jobsite for reduced setup time and faster operation.
Featured highlights:
- Fast, easy horizontal level, grade and vertical plumb setup with no manual leveling.
- Easy setups with the
2–way, full–function radio remote control and single and dual grade application capability offer quick payback.
- Automatic temperature and grade compensation eliminates rework.
|
GL422 Grade Laser
The GL412 Grade Laser (single grade) and GL422 Grade Laser (dual grade) lasers send a continuous, self–leveled 360° laser reference over your entire work area, and have a wide grade range so they can be used in a variety of slope applications.
Featured highlights:
- Fast, easy horizontal level, grade and vertical plumb setup with no manual leveling.
- Easy setups with the
2–way, full–function radio remote control and single and dual grade application capability offer quick payback.
- Automatic temperature and grade compensation eliminates rework.
|
DR400 Digital Rod
The Spectra Precision® DR400 DigiRod™ Digital Rod is a versatile, revolutionary tool that eliminates the need for grade rods when checking grades with a rotating laser. The combination of a laser receiver with digital readout, laser distance meter, and built–in tilt sensor provide the information required to take rod–less, accurate grade readings, even at tilt angles up to 30°.
Featured highlights:
- Extremely portable, universal system that eliminates the need to carry, transport, or maintain multiple grade rod types.
- Increases safety, reducing the need to lean over or go into excavations or trenches.
- Increases accuracy, the internal angle compensation system reduces errors and extra material costs due to tilted grade rods.
|
LT56 Universal Laser Layout Tool
The Spectra Precision® LT56 Universal Laser Layout Tool is an automatic self–leveling multi-purpose tool that can be used in a wide variety of interior and exterior construction applications. The laser produces provides three 360° planes of laser light. A horizontal plane and 2 vertical planes 90° apart.
Featured highlights:
- Capable of handling interior horizontal, vertical or plumb positioning application.
- 360° horizontal plane and 2 x 360° vertical planes provide a precise layout grid.
- Automatic self–leveling assures accuracy and fast setup.
|
1.5PL Cross Line Laser
The Spectra Precision® 1.5PL Precision Cross Line Laser is an accurate, automatic self–leveling multi–purpose tool with 2 vertical planes, a horizontal plane and down plummet. For interior building and remodeling, the laser is used for horizontal and vertical alignment, wall layout, acoustical ceiling installation, point transfer up and down, wall and floor tiles, finish carpentry, and 90° squaring.
Featured highlights:
- Automatic self–leveling and plumb assures accuracy and fast setup.
- One person installation of walls, doors, ceiling track and other overhead fixtures without the need for a plumb–bob, squares or tapes.
- Fast, one person 90° layout of rooms, walls, tile, carpet squares and fixtures.
|
5.2XL Cross Line Laser
The Spectra Precision® 5.2XL 5–Point and Cross Line Laser is an automatic self–leveling multi-purpose tool that can be used in a wide variety of construction applications. It eliminates the need for a contractor to purchase two tools—a 5 beam pointer and a crossline laser—by combining both into one simple small product.
Featured highlights:
- Automatic self-leveling assures accuracy and fast setup.
- The industry’s brightest crossline laser for easy viewing in all conditions.
- Easy–to–see 150° lines with a biased upwards beam that intersects the plumb up point for fast plumb alignment.
|
LT20 Cross Line Laser
The Spectra Precision® LT20 Cross Line Laser Tool is an automatic
self–leveling multi–purpose tool with 1 vertical plane and 1 horizontal plane. For interior building and remodeling, the LT20 laser tool is used for horizontal and vertical alignment, wall layout, acoustical ceiling installation and finish carpentry.
Featured highlights:
- Automatic self–leveling assures accuracy and fast setup.
- Rugged construction to withstand tough jobsite conditions.
- The industry’s brightest crossline laser for easy viewing in all conditions.
|
LP30 Layout Tool and
LP50 Layout Tool
The Spectra Precision® LP30 Layout Tool and LP50 Layout Tool are designed to handle a wide range of interior construction applications. These rugged laser layout tools offer several benefits to general and interior contractors, electricians, plumbers and a variety of tradesmen.
Featured highlights:
- Automatic self–leveling and plumb assures accuracy and fast setup.
- One person installation of walls, doors, ceiling track and other overhead fixtures without the need for a plumb–bob.
- Fast, one person 90° layout of rooms, walls, tile, carpet squares and fixtures.
|
QM55 Laser Distance Meter
The Spectra Precision® QM55 Laser Distance Meter is a fast, accurate laser distance meter designed for indoor use. Features include area, volume and Pythagoras functions for indirect measurements. It is handy for difficult vertical measurements, cluttered environments, over water and other measurements for which tape measures are not convenient.
Featured highlights:
- Rugged, designed to withstand drops up to 5 feet (1.5 m)—reduces downtime.
- Measuring range of 165 feet (50 m)—measure in difficult to reach areas.
- Accuracy of ±1/16 inch (±1.5 mm) over the entire range—reduces errors.
|
QM75 Laser Distance Meter
The Spectra Precision® QM75 Laser Distance Meter is the first distance meter that is designed and built specifically for the tough construction environment. Use of engineered plastics, generous use of rubber over–mold and clever electronic isolation make the QM75 the most robust laser distance meter available. It stands up to tough job site conditions.
Featured highlights:
- Rugged, designed to withstand drops up to 5 feet (1.5 m)—reduces downtime.
- Measuring range of 230 feet (70 m)—measure in difficult to reach areas.
- Accuracy of ±1/16 inch (±1.5 mm) over the entire range—reduces errors.
|
HR150U Laser Receiver
The Spectra Precision® HR150 Laser Receiver is an excellent receiver for contractors involved in extensive interior construction and remodeling work. The
dual–sided LED display and built–in magnetic mount make it ideal for interior leveling and aligning applications. Featuring a tough composite material housing, the HR150 Laser Receiver can withstand a drop of up to 1.5 meters
(5 feet) to a hard surface.
Featured highlights:
- Built–in magnet allows the receiver to mount to ceiling grid or drywall track without the need for additional accessories.
- Marking notches on both sides make it easy to mark alignments and elevations.
- Strong composite housing offers protection against damage due to dropping for reduced maintenance and repair.
|
HR220 Laser Receiver
The Spectra Precision® HR220 Laser Receiver is designed to detect laser beams generated from crossline lasers including the 5.2XL, 1.3XL and 1.5PL. The receiver can extend the indoor working range of these crossline lasers as well as increasing versatility by allowing outdoor use.
Featured highlights:
- HR220 receiver allows work indoors or outdoors up to 75 m (250 ft) and works in all horizontal and vertical applications.
- Magnetically attaches on ceilings or metal studs eliminating the need for addition accessories.
- Includes a heavy duty rod clamp for elevation control across the jobsite.
|
AL Auto Levels
The AL2XX series automatic levels are designed for a variety of elevation control and alignment tasks including general building construction, cut and fill measurements, area leveling, and landscaping.
Featured highlights:
- Choice of magnification: 24x, 28x or 32x.
- Choice of magnetic or air dampened automatic compensators.
- Double–sided, continuous horizontal tangent drives.
|
DET–2 Construction Theodolite
DET–2 Construction Theodolite The Spectra Precision® DET–2 is a rugged, cost–effective theodolite designed to give accurate angle measurements in general construction applications.
Featured highlights:
- 2” angular accuracy—
accurate enough for any construction job, yet the display resolution can be tailored to operator’s preferences for fast readings.
- Vertical axis compensation—tilt sensor provides the highest level of accuracy and can be turned on or off depending on job requirements.
- Dual LCD with extra large characters—easy to see angle readings eliminate errors and reduces eye fatigue.
|
LR20 Laser Machine Display Receiver
The Spectra Precision® LR20 Laser Machine Display Receivers allow compact machines to achieve tighter tolerances without the need for a grade checker. Now smaller machines can be more productive while improving accuracy and saving material usage costs..
Featured highlights:
- 8–in., 360° laser reception provides increased working area and range.
- Polycarbonate housing and elastomer over molding provides rugged durability for years of reliable use.
- Super bright grade display with green
”on–grade” LEDs provides superior depth/elevation indication.
|
LR30 & LR30W Laser Machine Display Receivers
The Spectra Precision® LR30 & LR30W Laser Machine Display Receivers are designed to be used as a stand–alone display receiver on grading and excavating equipment including: dozers, backhoes, excavators, scrapers, skid steers, and levelers.
Featured highlights:
- Five channels of grade information plus directional out–of–laser beam indicator directs which way to move and get back in the beam.
- Three selectable accuracies meet job tolerances from rough grading to final finishing for maximum flexibility.
- Adjustable, ultra–bright LED with green on–grade display provides user selectable, easy–to–see display to match ambient lighting conditions.
|
Close ^
Breaker & Rotary Hammers (Close ^)
1–9/16” SDS–Max Rotary Hammer
Powerful 11 amp motor. One touch sliding chuck accepts SDS–Max hammer steel. 2–mode switch for ”hammering only” or ”hammering with rotation”. Preset variable speed dial with 5 settings to match the bit speed to the application. 16.4 ft. jobsite cord for greater versatility and instant power. L.E.D. power light indicates switch failure or cord breakage. L.E.D. service light indicates carbon brushes need to be replaced. Externally accessible brushes for easy replacement and longer motor life.
|
1” Rotary Hammer with D–Handle
(3–Mode)
Powerful 7.0 amp motor and lightweight: 6.2 lbs. Two times faster drilling with synchronized RPM and BPM. 3–mode operation: ”rotation only”, ”hammering with rotation” or ”hammering only”. Chisel rotates 360° with 40 different locking positions. Varialble speed for complete drilling and hammering control; reversible. Positive bit lock ensures that the bit is securely fastened. Built in torque limiter helps prevent kickback when hitting reinforcements. One–touch sliding chuck for easy bit changes; accepts SDS–Plus bits. Large trigger switch and 360° swivel side handle for added comfort. Recessed lock–on button for continuous use. Ergonomic, well balanced design features a rubberized D–handle grip for greater stability, comfort and control with reduced operator fatigue. Ideal for anchor setters, sign hangers, installers, electricians, plumbers and masons.
|
70 Lb. Breaker Hammer (AC/DC)
Features an innovative pneumatic compression system that automatically adjusts air in the cylinder to minimize power loss. Special idling mechanism prevents hammering while idling. High impact resistant housing cover insulates
heat for more comfortable handling. Innovative shock absorbing handle minimizes vibration transmission. Automatic brush cut–out system. Accepts commonly used 1–1/8” hex shank and air tool steel. Powerful 15 amp motor. Factory grease packed for approximately 200 hours of maintenance free operation.
|
Close ^
Measuring (Hide this section ^)
Fiberglass Measuring Reel
Double coated blade greatly reduces wear. Fiberglass tape will not rot, corrode or distort. Nonconductive material protects user from electrical shock.
|
Nylon Measuring Reel
Permanently nylon coated blade. Lightweight, torsion resistant design. Heavy duty construction.
|
Measuring Wheel
5–digit, easy–read magnified counter that subtracts in reverse. Measures almost two miles without resetting. Curved, telescoping handle adjusts to comfort level.
|
Crick Levels
Hardened 16–gauge stainless steel binding. Wood is sealed with penetrating type oil. Vials are guaranteed to an accuracy of .015” in length of level. Chemically tempered 1/8” thick lenses sealed with silicone and secured with stainless steel retainer clips.
|
Leverlock Tape Rule
High visibility yellow. Dual action lever. Special Tru–Zero hook allows use of nail as pivot to draw circles.High visibility yellow.
|
|
Close ^
Marking (Close ^)
Plastic Chalk Boxes
Self sealing ”quick fill/no spill” grommet. String is cotton polycord that holds chalk until it is snapped right where you want it. 1/8th of an inch thick for bold lines.
|
Metal Chalk Boxes
Fits in your hand, tool belt, or even your glove box. Thin lines wherever, whenever you need them.
|
Marking Chalk
Ideal for your basic chalk line needs. Formulated to achieve a perfect line every time.
|
Masons Twine
Available in fluorescent colors: pink, green, yellow, orange.
|
Twine Winder
Includes 325 ft. of yellow twisted nylon mason line.
|
Lumber Crayons
For use on oily, slick, wet, cold or dry surfaces. Ideal for lumber, concrete, ceramics, and metal. Non–toxic, waterproof.
|
Carpenter Pencils
Lays down a traditional rich black mark that is easy to see. Easy sharpening, smooth marking, long lasting. Flat hex shape fits in the pocket and keeps it from rolling or blowing away. Rectangular core allows thin or thick lines to be drawn by simply rotating the pencil.
|
Marking Paint
Inverted spray valve. Formulated to generate superior brilliance for long–range visibility. Quick drying.
|
Marking Paint Applicators
Spray as you walk. Comes with a firm rubber grip design and a trigger action which can be operated with one finger. For use with our inverted valve fluorescent marking paint.
|
Stake Flags
From utility construction to line locating, these are ideal for aboveground marking to ensure consistent communication and long–lasting visibility for your project.
2½” x 3½” flags on a 21–inch stake.
|
Flagging Tape
Made of tough vinyl material to resist weather and wind ravel. Can be used for flagging boundaries and survey markers, and as an easy and effective way to delimit areas of construction. Strong 4–mil. thickness. Non–adhesive, won’t stick to itself or to anything else. 1–3/16” wide.
|
|
Collapse section ^
Mixers (Close ^)
Poly Drum Mortar Mixer
EasyClean polyethylene drum. Powered by reliable 8–hp Honda gasoline engine. Mixing capacity of 9 cubic feet. Heavy duty tubular steel frame with forklift pocket. Suspension springs standard for less bounce and sway. Powder coat paint for a durable long lasting finish. Overall length with tongue: 102”. Overall height: 59”.
|
Steel Drum Mortar Mixer
A heavy–duty mixer featuring hydraulic drive for larger, lower slump loads. Large mixing capacity: 12 cubic feet. Solid axle with large B78x13 tires for smooth towing. Rugged 14–gauge engine cover reduces vibration fatigue. Heavy duty tubular steel frame. Optonal hydraulic dump. Overall length: 82 inches. Overall height with dump handle: 72 inches.
|
Close ^
Sack Goods
|
Power Saws
|
Nail Guns
|
Traffic & Safety
|
PPE
|
Power Trowels
|
Everything Else
|
Sack Goods (Close ^)
Masonry Cement Type N
Manufactured specially to meet the needs of the brick, block and stone mason in the field. Reaches 750 psi at 28 days when proportioned in accordance with ASTM C 270 requirements. Meets ASTM C 91 specifications. Used for laying brick, block and stone, building or repairing chimneys, walls, planters and outdoor grils. Also for tuck pointing joints and stuccoing walls.
|
Portland Cement
A general purpose cement which meets ASTM C150 specifications for both Type I and Type II cements. Meets the low alkali requirements of these specifications. Used for pavements, foundations, sidewalks, walkways, patios, swimming pool decks, bridges, precast and prestressed concrete, tanks, water pipes, soil stabilization and masonry units. May be used for applications requiring modering sulfate resistance.
|
Mortar Mix
A blend of masonry cement and graded sand designed to meet ASTM C 270 for Type N Mortar. Just add water. Use for construction and repair of brick, block or stone barbecues, pillars, walls, tuck–pointing mortar joints, planters, etc.
|
Concrete Mix
The original 4000 psi average compressive strength blend of portland cement, sand and gravel or stone. Just add water. Use for any general concrete work. Use for setting posts and for building sidewalks, floors, steps, patios, curbs and downspout troughs.
|
Collapse section ^
Power Saws (Close ^)
7–1/4” Circular Saw
Heavy gauge aluminum wraparound base ensures stable support. Shaft lock for easy blade replacement. Heavy duty 15 amp motor for continuous operation. Ball bearing construction. AC/DC switch for use with alternative power sources. Includes special ”thin rim” carbide blade. Includes plastic tool case for convenient storage.
|
7–1/4” Hypoid Saw
Hypoid gearing system for maximum power output. Zero to 50° bevel cutting capability; cuts a 2x4 at a 50° bevel. Powerful 14 amp motor. Maintenance free hypoid gearing for long tool life. Heavy gauge steel base for durability. Ruler on base for accurate cutting; 1–1/2” from blade to the left edge of saw. Low noise level; only 87dB for quieter operation. Accepts diamond knockout blades. Double insulated.
|
7–1/4” Metal Cutting Saw
Powerful 13 amp motor and long lasting CERMET tipped blade to tackle multiple applications. CERMET tipped blades are made with a special Ceramic–Metal mixture that resists heat which can shorten the life of traditional carbide–tipped blades. Fast, effortless cutting through single or multiple metal pieces with burr–free ends that are cool to the touch. Virtually spark–free cuts. Heavy duty blade cover for efficient chip collection for increased performance. ”Tool–less” blade cover removal and chip collection window for operator convenience. Quick release blade guard lever for plunge cutting. Stainless steel base plate for stability and durability.
|
12” Angle Cutter
Powerful 15 amp AC/DC motor delivers 5,000 RPM. Rubber shield helps keep debris away from operator and from entering the motor. Removable base for closer edge–to–edge cut. Guide wheels on the tool guard ensure smooth travel over surface material. Tool body position can be adjusted (0–80°) for operator comfort; operates independently of cutting depth for convenience and efficiency. Rubberized wrap around handle for encreased control and comfort with reduced operator fatigue. Lock–on button for continuous operation. Ball bearing construction for longer tool life. Externally accessible brushes for greater serviceability. Great for builders, fire/rescue, maintenance, remodelers, roofers, masons, pipe fitters and many other applications.
|
14” Portable Cut–Off Saw
Cuts 4–1/2” round stock at 45 and 90° angles. D–shaped handle for easy gripping. Lock–off button to prevent accidental starting. Spark diversion guard for operator’s safety. Guide plate adjusts 45° right and left—3 locations for various sizes of materials. Quick release vise for secure stock retention and fast repeated cut–offs. Socket wrench stores on base for convenience. Adjustable depth stop for precise, repeatable cutting depth. Shaft lock for easy wheel changes.
|
Portable Band Saw
Large 4–3/4” x 4–3/4” cutting capacity. Powerful 6.5 amp motor delivers 200–300 ft./min. for cutting in a wide variety of materials. Dual bearing blade guides and adjustable stopper plate. Variable speed dial for setting maximum cutting speed. Blade tightening lever for fast and easy blade installation. Accepts standard 44–7/8” x 1/2” blade.
|
4–1/2” Angle Grinder
Labyrinth construction seals motor and bearings against contamination. Extra large paddle switch for easy operation, right or left handed. Small circumference barrel grip. High power–to–weight ratio. Powerful 6.4 amp motor. Spiral gears for efficient power transmission. Spindle lock for easy accessory changes. Double insulated.
|
12” Power Cutter
Five–stage, foam/paper/nylon system with Advanced Directional Air Flow provides very clean air for better saw performance. Reinforced aluminum blade guard with 70° range of limitless positioning using a marked knob handle. Improved ignition system with larger flywheel and rare earth magnets for more power. Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground. Starter grip and decompression valve located on the same side for faster starting. On/Off/Choke operating switch on a single lever for operator convenience. Cushioned operator grips with 4 vibration absorption rubber buffers for increased operator comfort. Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank. Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance.
|
Reciprocating Saw
Variable speed for increased cutting efficiency. Powerful 9 amp motor for continuous operation. Long 1–1/8” stroke for faster cutting. Internal dust blower system clears debris from the line of cut for better visibility and accuracy. Heavy duty shoe features tool–less adjustment. All ball and needle bearings for longer tool life.
|
18” Chain Saw
Rugged cast cylinder. Easy maintenance. Low noise operation. Efficient cold weather operation. Double air filtration. High power–to–weight ratio.
|
Compact Masonry Saw
Combines the performance of full size masonry saws with convenient portability. Rugged steel guards, jig–welded frames and integrated forklift brackets for easier movement around job sites. Standard rear wheel dolly design for easy transport and set up.
|
Walk–Behind Concrete Saw
Newly designed 13 horsepower floor saw for wet or dry asphalt and concrete cutting. Heavy duty frame, stay–level chassis and optimum weight distribution.
|
Collapse section ^
Cordless Nail Guns (Close ^)
Cordless 30–Degree Framing Nailer
The convenience and freedom of no hoses or compressors. Drives 2” to
3–1/4” fasteners for every framing application. Fits between 16”
on–center joists, studs and roof trusses. Lets you work comfortably in cramped, overhead and other hard to reach areas. Locks out tool at four nails to prevent blank firing and minimize wood damage. Tool–free depth of drive adjustment.
|
Cordless 16 Ga. Finishing Nailer
The convenience and freedom of no hoses or compressors. Angled magazine for easy access to corners. Perfect for overhead use. Drives
1–1/4” to 2–1/2” fasteners. Tool–free depth of drive adjustment. Nail lockout locks out tool at 10 nails to prevent blank firing and minimize wood damage. No–mar tip with sight lines provides precise placement and prevents damage to expensive wood. Quick–clear nose cover for easy access to remove infrequent jams.
|
Cordless 18 Ga. Brad Nailer
The convenience and freedom of no hoses or compressors. Tool–free depth of drive adjustment. Side loading magazine. Quick–clear nose cover for easy access to remove infrequent jams. Narrow no–mar tip provides for easy access to confined areas and permits precise placement of fasteners. Drives 5/8” to 2” fasteners.
|
Fuel Cells
Each drives approximately 1,200 nails.
|
Close ^
Traffic & Safety (Close ^)
Plastic Barricades
Certified with and without lights. Weighs only 15 lbs. 12”x24” top panels and 8”x24” bottom panels afford maximum panel area for reflective sheeting, logos or stenciling. Built in bracket accommodates barricade light. Optional plastic sand ballast bar for additional weight.
|
Barricade Lights
Available in 6V or 12V battery configuration. 3–way or flashing models available. Photocell for automatic on/off by light conditions. Theft resistant bolts with custom socket. 360° lens rotation.
|
Barrier Tape
Prevents accidents by increasing visibility of hazard with its continuous repeat of message or warning. Lightweight and economical, yet super–strong. High–density poly tape resists stretching and tearing. For indoor or outdoor use; will not rot and is reusable. Can be handled and tied like rope or can be stapled or nailed in place. Meets OSHA 1910.144 for marking physical hazards.
|
Traffic Cones
One piece wide body design and construction. Easier stacking—no pinch points with collars. Protected reflective translates into longer service life lowering overal usage costs. Available in 28” and 36”.
|
Delineator Posts
Standard 4” x 38” high post; overall height 43”. Two 3” reflective bands standard. Features 8” diameter cast aluminum base with clamp. Order optional 3” round yellow reflective dot on both sides of post for additional safety. Anchor bolts sold separately.
|
Stop & Slow Paddles
Octagon shape. Paddles available silk screened or reflectorized with Engineer Grade, Hi–Intensity or Diamond Grade sheeting. Letter size: 8” in 24” paddle or 6” in 18” paddle. Staff and couplings sold separately.
|
36” Reflective Roll–Up Signs
Fluorescent orange color provides maximum visibility. Fluorescent orange microprismatic sheeting increases legibility and provides higher retroreflective performance. Features vinyl–coated nylon pocket design. Lexan pockets available upon request at additional cost.
|
Flaggers’ Flags
24” x 24” with 30” plastic staff. Reflective and non–reflective. Ideal for roadside construction and directing traffic. High visibility orange.
|
Sign Stands
Spring–loaded sign stands display 36” and 48” roll up panels a minimum of 14” off the ground. Exclusive base, spring and leg design eliminates the need for sandbags and absorbs winds up to 50 mph. Kick lock release lever allows easy leg unfoliding and adjusting to uneven terrain. Durable, lightweight and corrosion resistant aluminum legs. Quick lock mast allows for easy panel set up and take down.
|
Safety Fencing
Heavy duty diamond mesh safety fence with smooth top and bottom. Sold in 4’ by 100’ rolls.
|
Silt Fencing
100 ft woven silt fence with stakes. Sold in 3’ x 100’ rolls. Woven silt fence with 42” hardwood stakes that are spaced 10 feet apart.
|
Sand Bags
For temporary construction of dikes to redirect storm and debris flows away from property.
|
First Aid Kits
Available in metal or polyethylene box. Sizes range from a 10–person kit up to a 50–person kit.
|
|
|
|
Close ^
Personal Protective Equipment (Close ^)
Safety Vests
3 pockets: 2 inside, 1 outside along with shoulder mic/antenna tab. 4–inch split fluorescent trim with
2–inch wide super bright silver retroreflective tape. Adjustable panel belt system for tailored fit over bulky clothes. Soft, lightweight fluorescent polyester fabric and machine washable.
|
Hard Hats
Universal slots connect to hearing, welding and visor accessories. Available with ratchet or pinlock suspension. Six point nylon suspension with cloth sweatband.
|
Western Hard Hats
Wide brim for protection against harmful UV rays. Stylish, comfortable and fits all head sizes. Four point ratchet suspension.
|
Safety Glasses
Stylish ergonomic frame with polycarbonate lens for the ultimate in protection. Soft rubber nose pad with self–adjusting fingers for all day comfort.
|
Ear Muffs
Low profile, lightweight. Ergonomic ear cups are individually contoured to each ear for optimal fit. Fold up for easy compact storage. Ultra soft ear cushions for added comfort.
|
Dust Masks
Low profile design and sure fit triangular nose cushion of soft, closed cell foam provides exceptional worker comfort. Strong, stapled head straps for long life and comfort.
|
Close ^
Power Trowels (Close ^)
Ride–On Power Trowel
Smooth responsive steering assist makes this unit easy to control on any slab. Twin 36–inch non–overlapping rotors great for all stages of finishing from panning to sealing. Equipped with a 24–hp Honda V–Twin gasoline engine and construction grade driveline that enables rotor speed ranges from 36–170 rpm.
|
Walk–Behind Power Trowel
Extra horsepower, rotor speed of 75–155 rpm. Driven by an 11–hp Honda gasoline engine.
A 46–inch ring diameter. Heavy–duty gearbox handles the machine’s extra weight. Weighs 245 pounds.
|
12V Cordless Concrete Vibrator
Vibrates at 12,500 VPM for smooth mixing of concrete. Produces a consistent finish on concrete footings and walls. Increases strength of concrete. 46–7/8” flexible shaft. Protective cover on switch and battery to prevent contamination.
|
Close ^
Everything Else (Close ^)
Concrete Car Stops
Each have two holes cast into them, one at each end, to allow for hold down spikes. Rebar anchors included. Length: 6’.
|
Concrete Blocks & Pads
Assorted sizes available.
|
Type 1 Safety Metal Cans
Non sparking brass pour spout and flame arrestor. Also available in blue (kerosene) and yellow (diesel).
|
Jobsite Storage Chest
Super duty hinge features a staked and welded pin that cannot be driven out. Easy load skid bolsters allow chest to be fork lifted from all four sides to easily move it around the job site or load on a truck or trailer. Padlock sold separately.
|
Extension Cords
Designed for use by contractors. High visibility jacket. Meets OSHA requirements for indoor/outdoor use.
|
Step Ladders
300–Lb. duty rating. 4–inch solid aliminum rivets attach top rails. U–channel double braced bottom steps. Wide traction tread, deeply serrated steps. Heavy duty internal spreaders.
|
Powerblock Adapter
Converts single 15A, 125V U–ground outlet to three.
|
Water Coolers
Stain and odor resistant liner, screw tight lid and drip–resistant spigot. Extra thick insulation ensures superior thermal retention.
|
Rubber Boots
Made of high quality rubber, reinforced at stress points for durability. Plain or steel toe.
|
Knee Boards
Constructed of ABS plastic material that is easy to clean, lightweight and is durable. Contoured shape eliminates marring of the concrete and cuts down on finishing time. Includes two metal foot brackets and rubber knee pads. Sold in pairs.
|
Knee Pads
Designed for light construction, DIY, and a variety of household and garden uses. DIY rated
light–medium use. Contoured shape for fit and comfort. Single strap for reduced binding
|
Work Belts
1–3/4” or 2” widths. Made of top grain leather. Nickel plated roller buckles. Fits 28” to 44” waists.
|
Sand Bags
For temporary construction of dikes to redirect storm and debris flows away from property.
|
Silt Fencing
100 ft woven silt fence with stakes. Sold in 3’ x 100’ rolls. Woven silt fence with 42” hardwood stakes that are spaced 10 feet apart.
|
|
|
Close ^
|
